Atomos ZATO CONNECT, Руководство пользователя

Страница: 12 / 43

There is a row each for both HDMI and USB UVC outputs. Both have a dedicated SIGNAL
section that details the signal coming out of either port.
Note: "Video Output USB" is assigned to the USB-C port labeled USB 2 on the rear of the
device. Compared to USB 1, which just acts as a webcam input, it's a multipurpose port that
may also be used as a connection point for the included USB-C to Ethernet adapter.
Note: While the HDMI Out port supports outputting 1080p signals at up to 60fps, the USB
UVC output is limited to a maximum output frame rate of 30fps. If the ZATO CONNECT's
input signal surpasses 30fps, the ZATO's USB UVC output will automatically drop frames to
output a signal at half of the original frame rate.
Example: HDMI Input = 1080p60, HDMI Output = 1080p60, USB UVC Output = 1080p30
Audio:
The ZATO CONNECT comes equipped with a built-in Audio Mixer.
The mixer consists of 3 stereo audio meters. There is one for each audio input (Mic/Line,
HDMI, USB), as well as the fourth pair of stereo meters for the output mix.
To add an audio source to the mix, press the button below the corresponding meter.
Pressing the button again removes the source from the mix.
After adding a source, you can adjust the volume/gain via the slider to the right of each
meter to make sure that it's mixing well with the audio coming from the other channels.
Once the independent channel volumes have been adjusted to your liking, you may make
Input
Output
Audio
Network
Connect
Overlay RecordMedia General
-12
-20°
MIC/LINE
» Mic
-30*
-40.
Mic/Line
HDMI USB OutputMix