Atomik A.R.C. C1, Инструкция по эксплуатации

Страница: 10 / 20

10
STEP 7
Turn on the transmitter and then the boat to make sure the rudder servo horn is straight.
You can use the steering trim function to help center the servo horn. Use a small amount of
thread lock before tightening the set screws to keep it from backing out during use.
STEP 8
OK! NO! OK! NO!
Attach the clear silicone water-cooling tubes to the water inlet nipple on the top of the rudder.
Make sure the water-cooling tubes are free of kinks and tight bends to ensure that water flows
freely to the motor and ESC to maximize cooling.