2
User Manual XL12 & XL15
Dear Customer,
Thank you for purchasing this Atomic XL active speaker. With decades of experience in design and production,
Atomic is one of the leading manufacturers of professional audio equipment.
This unit has been designed and manufactured to the highest of standards so you can be assured you have
made a good investment.
For your safety and to ensure you make full use of all the features, please make sure you read this manual in full.
Product Description:
A powerful active speaker with a built in 800-Watt RMS class D lightweight amplifier. A simple mixer section
makes this speaker easy to use. The user can connect to any suitable mixer or similar device via an XLR or ¼”
jack cable or connect a microphone straight in. There are two mixer channels these are on XLR/¼” jack combi
sockets. There is also a XLR link output, this can either send a mix of channel 1 and 2 or just channel 2. Any
Bluetooth enabled device can be paired with this speaker, making a totally wireless connection. The easy to
use DSP pre-sets help adjust the sound to suit different applications. Custom loudspeaker drivers have been
used, giving perfect playback for music and live vocals.
Safety Advice:
• Read this manual in full before operating this product.
• Keep this manual in a safe place for future reference.
• Heed all warnings and instructions, both in this manual and on the product.
• Carry and transport this product with care. Dropping this product may result in serious mechanical failure.
• The manufacturer accepts no responsibility for injury or damage caused as a result of not following the
manual provided.
• Turn off this active speaker when not in use.
• This speaker is not waterproof and should not be used outside or in wet conditions.
• In the event of any liquid entering the housing, unplug immediately & contact a qualified engineer.
• Do not attempt to modify this unit.
• Always install the unit in a suitable location where no injury can occur from the speaker falling.
• Check this unit matches the mains voltage and frequency before plugging it in to your mains socket.
• Should you experience any malfunction or damage to the mains cable, disconnect from the mains supply
immediately and consult a qualified engineer or replace the cable with a new one.
• All parts should be replaced with genuine spare parts and repairs carried out by a qualified engineer.
• Do not place near sources of heat or ignition.
• Check your AC wall socket will take the power you are applying to avoid overloading the mains supply.
• No naked flame i.e. candle should be placed on top of this appliance
Protection from Electric Shock:
• Only connect this unit to a mains socket with suitable trip and RCD protection.
• To disconnect from the mains socket, always remove by the mains plug or IEC connector. Do not attempt to
remove by pulling the mains cable.
• Disconnect the unit from the mains supply before cleaning. Cleaning should be carried out with a soft, dry cloth.
• Do not expose this unit to any liquids.
• Do not operate near exposed water or in high humidity.
