Atomic G05214W, Инструкция по эксплуатации

Страница: 9 / 17

STEP 9:
With the help of another adult, carefully lift the assembly from
STEP 8 (FIGURE 8B) to the assembly from STEP 4 (FIGURE 4)
as shown in
FIGURE 9
.
PARTS REQUIRED
2 pcs - H11 Acorn Nut 6 pc - H16 Screw
2 pcs - H12 Flat Washer 1 pc - P24 Cord Clip
!
WARNING:
THIS STEP REQUIRES THREE OR MORE ADULTS.
Assembly from
STEP 8
.
Assembly from
STEP 4 .
9 © 2013 Escalade Sports For Customer Service Call 1-886-996-2729
All Right Reserved.
STEP 10:
Secure the assembly from STEP 8 (FIGURE 8B) and the assembly from STEP 4 (FIGURE 4) using H16 Screws as shown
in FIGURE 10 . IMPORTANT NOTE: Secure P25 Female Pivot Bushing with H16 Screws using Pre-Drilled holes
shown on P9 End Frame Panel. All H16 Screws must be tight - but not stripped.
Secure assembly using H12 Washer with H11 Acorn Nuts as shown in FIGURE 10 . Use T1 Wrench to tighten H11
Acorn Nuts.
Peel the backing off
P24
Cord Clip and attach to a side of the table as shown in
FIGURE 10
.
H11 H12
FIGURE 10
H12
H11
3rd adult helps
to insure P25 Female Pivot Bushing
/ H10 Male Pivot
Assembly
slides down
into slot on
each end of
table correctly.
H10
CAUTION:
PINCH POINT!
CAUTION:
PINCH POINT!
Two (2) adults lift
from each side to
install.
FIGURE 9
P24
PEEL & ATTACH
P24
H16
P25 P9
H16
IMPORTANT NOTE:
Secure P25 Female Pivot Bushing
with H16 Screws using Pre-Drilled
holes shown on P9 End Frame
Panel.
P25
CAUTION:
PINCH POINT!