PARTS REQUIRED
1 pc -
P17
Outer Apron
with
Cord Hole
1 pc -
P18
Outer Apron
without
Cord Hole
STEP 7:
To install
P17
Outer Apron
with
Cord Hole, please feed the cord plug end back inside the hole in side apron.
Carefully insert and sleave
P17
Outer Apron
with
Cord Hole and
P18
Outer Apron
without
Cord Hole as shown in
FIGURE 7
.
P17
P18
FIGURE 7
STEP 8:
Feed the plug end again through the hole in the side apron as shown in
FIGURE 8A
.
Attach
P21
Round Plastic for Cord Hole as shown in
FIGURE 8B
.
Install four (4) pcs
H20
Screws on each end of the side apron as shown in
FIGURE 8B
.
Insert
P25
Female Pivot Bushing onto each
H10
Male Pivot Assembly on each end of table as shown in
FIGURE 8B
.
NOTE: The P25 is not permanently attached until STEP #10.
PARTS REQUIRED
4 pcs -
H20
Phillips Flat Head Screw
1 pc -
P21
Round Plastic for Cord Hole
2 pcs -
P25
Female Pivot Bushing
Cord Plug
FIGURE 8A
Cord Plug
FIGURE 8B
8
© 2013 Escalade Sports
For Customer Service Call 1-886-996-2729
All Right Reserved.
P21
White laminate
face
outside
.
White laminate
face
outside
.
IMPORTANT NOTE:
End of
P17
&
P18
Outer Apron must be
flush with table end apron.
IMPORTANT NOTE:
Do not run cord through side
pocket holes. Please use the holes directly beside
the side pocket.
H20
H20
H20
H20
IMPORTANT NOTE:
This hole is offset and
must match this hole.
Note:
Pilot Holes
H10
P25
P25
