© 2012 Escalade Sports
For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
PARTS REQUIRED:
6 pcs -
H6
Phillips Round Head Screw
4 pcs -
P11
Corner Cap
2 pcs -
P18
Ball Entry Cup
8 pcs -
H9
Phillips Flat Head Screw
2 pcs -
P13
Scorer
4 pcs -
P24
Cup Holder
2 pcs -
P9
Playfield Trim
16 pcs -
P17
Rod Bushing
FIGURE 6
STEP 6:
Peel the protective coating off
P9
Playfield Trims, then peel the adhesive strip protective coating off the underside
of
P9
Playfield Trims, then very carefully place them along
P3
Playfield as shown in
FIGURE 6
.
Attach
P11
Corner Caps using
H9
Screws as shown in
FIGURE 6
.
Tighten, but do not strip out H9 Screws.
Attach
P13
Scorers onto the top of
P2
End Apron as shown in
FIGURE 6
.
Insert
P17
Rod Bushings onto both
P1
Side Aprons as shown in
FIGURE 6
.
Please make sure to insert
P17
Rod Bushings from the inner side of P1 Side Apron for correct assembly.
Attach
P18
Ball Entry Cups using
H6
Screws as shown in
DETAIL C
.
Tighten, but do not strip out H6 Screws.
Carefully - Tap
P24
Cup Holders down into
P2
End
Aprons as shown in
FIGURE 6
.
P9
P13
Note:
Red Bead scorer should
be on opposite side of
Ball Return.
P13
Note:
Red Bead scorer should
be on opposite side of
Ball Return.
P11
H9
H9
DETAIL C
P17
P18
H6
P24
Note:
Carefully tap
P24
Cup Holders down.
Rubber
Hammer
IMPORTANT NOTE: P17 Rod Bushings may require the use of a rubber hammer for installation into side apron.
With a rubber hammer, lightly tap bushing squarely into place. DO NOT USE STEEL HAMMER!
If a rubber hammer is not available, place a piece of wood squarely on bushing and lightly tap into place.
