© 2012 Escalade Sports
For Customer Service Call 1-888-996-2729
5
All Rights Reserved.
PARTS REQUIRED:
2 pcs -
P1
Side Apron
1 pc -
P3
Playfield
STEP 1:
Find a clean, level place to begin the assembly
of your soccer table. We recommend building
the table on the box top to protect the parts
during assembly.
Set
P3
Playfield into the grooves in
P1
Side
Apron as shown in
FIGURE 1
.
FIGURE 1
P1
P1
P3
NOTE:
Graphic on this side.
Groove
PARTS REQUIRED:
8 pcs -
H1
Allen Head Bolt 8 pcs -
H7
Phillips Round Head Screw
4 pcs -
P12
Corner Post
8 pcs -
H3
Flat Washer 2 pcs -
P2
End Apron
1 pc -
T1
Allen Wrench
STEP 2:
Attach
P2
End Aprons onto
P1
Side Apron using
H1
Allen Head Bolts with
H3
Flat Washers as shown in
DETAIL A
.
Do not tighten H1 Bolts on this time.
Slide
P12
Corner Posts on the each end of
P1
Side Apron and
P2
End Apron. Use
T1
Allen Wrench to tighten
H1
Bolts. Use
H7
Screws to secure
P12
Corner Post as shown in
FIGURE 2
.
Tighten, but do not strip out H7
Screws.
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY SET P3 PLAYFIELD INTO THE GROOVES
IN P1 SIDE APRON.
DETAIL A
H1
H7
H7
H3
H3
P12
P1
P1
P12
P12
P12
P2
P2
FIGURE 2
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY ATTACH P12 CORNER POST
ONTO EACH P1 & P2 APRON.
NOTE:
P12
Corner Post should be
flush with bottom of
P1
Side and
P2
End aprons.
NOTE:
Install
P12
Corner Posts
with arrow pointing down.
ATTENTION:
ATTENTION: