Atomic ATP5000XE, Руководство пользователя, Страница: 12 / 16

12
TROUBLESHOOTING
Common issues can be fixed by following the
instructions in this guide. If the generator will
not operate normally after following these
instructions, contact an authorised dealer or
qualified technician before attempting to use
or carry out any repairs.
Many troubleshooting procedures present
hazards which can result in severe personal
injury or death. Only trained and experienced
service personnel with knowledge of fuels,
electricity, and machinery hazards should
perform service procedures. Review Safety
Precautions. A hot generator can cause severe
burns. Always allow the generator to cool
before performing any maintenance service.
ISSUE CAUSE ACTION
Engine cranks
slowly
Engine oil is too heavy Replace with recommended oil
Load is connected Disconnect all appliances from the front panel
Engine is
not starting
No fuel Refill tank
Fuel tap is closed Fully open fuel tap
Fouled spark plug Remove, clean or replace spark plug
Not enough oil Add more oil
Black
Exhaust
Choke stuck in closed position Open choke
Dirty air cleaner Clean air filter
Rich fuel mixture Contact an authorised dealer
Engine
Stops
No fuel Refill tank
Not enough oil Add more oil
Engine has
difficulty
idling
Loose spark plug cable Reconnect or repair cable
Faulty spark plug Remove, clean or replace spark plug
Generator is not level Move generator to a level surface
Dirty fuel filter Replace the filter
No AC
Output
Tripped AC Circuit breaker
Disconnect all devices, reset breaker
and check devices for damage.
Do not exceed the generator load rating
No battery
charge
DC output
Corroded battery posts Clean posts
Damaged cables Replace cables
Damaged battery
Check for leaks, cracks and swelling,
replace if defective.
Damaged DC socket Contact an authorised dealer
JAM2013_atomic_TP_manual_ED3.indd 12 11/05/12 3:45 PM