9
NOTE
If the device does not restart within 30 seconds, remove and re-insert
the batteries, and again power-up the device. Once the device has been
updated you will need to either format the card or delete the update file
manually. In the event you do not perform the previous actions, the system
will ask you if you wish to update the device every time you turn it on.
ON/OFF
To TURN ON the device,
press and hold the POWER
Button until you see the ATN
splash screen.
To TURN OFF the device,
press and hold the POWER
Button until the “Shut down
the device?” appears in the
dialog box. Choose “Yes” to turn off the unit.
NOTE
Upon startup you must perform a NUC. Please refer to page 26 to learn
how to perform the NUC process correctly.
USING KEYPAD
The KEYPAD is programmed to be used
in two different ways:
• Short and Quick Taps — used for most
functions and to get around the menu;
• Press and Hold — designed to be
used in the following situations — ON/
OFF, ZOOM and SHORTCUT MENU.
NOTE
Using LEFT or RIGHT buttons in the
Menu will allow you to quickly choose
Exit Shortcut from any position.
FOCUSING
DIOPTER ADJUSTMENT
Look through the eyepiece, focusing on
the reticle on the screen, and rotate the
Diopter Adjustment Ring until optimal
sharpness is achieved. Do not take the
rubber cap off the objective lens.
NOTE
You should not have to re-adjust the
Diopter Adjustment unless another
user, with different vision needs, uses
the scope.
FOCUS ADJUSTMENT
Remove the cap from the objective lens
and rotate the focus adjustment ring, as
necessary, to achieve the proper focus at
various distances.
DIOPTER
ADJUSTMENT RING
FOCUS
ADJUSTMENT
RING
