2
ApplIcATION
The Night vision Monocular is a complex opticoelectronic system for individual use. The device
consists of the objective lens assembly, eyepiece and the body. The body contains a image
intensifier tube assembly with an integrated high voltage power source and the three volt bat-
tery housing. When installing the battery one should keep in mind that the polarity of the bat-
tery should coincide with the diagram on the body next to the battery housing cap.
Objective lens protective cover is intended to protect the objective lens from dust and
scratches. it will also act as a daylight filter, allowing you to test the scope in daylight or other
bright light situations. The pin-hole in the center of the protective cover allows the user to
check the operation ability of the device in daylight conditions.
The scope is equipped with the automatic shut-off system. This system tracks when the
scope is not used (the controls are not touched for 60 minutes continuous) and shuts the unit
off automatically.
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap
on for more than ten (10) minutes.`
sMART DIgITAl TEchNOlOgy
smart Total darkness Technology finally provides the user total control in the hi-tech industry
of Night vision. The smart series Night vision scopes have been designed according to the
latest computer technology.
Onboard computer systems identify the users intention of looking through the scope. When
the scope is brought to the user’s eye, the scope automatically turn on. When removed from
the eye the scope turns off (you must engage the proximity sensor for this feature to work).
The user will never have to worry about turning his or her scope on or off. smart series scopes
automatically sense when they are no longer used (60 minutes) and will shut off and enter their
sleep mode. all the controls and buttons are digital. even if your batteries are low, don’t worry
spEcIfIcATIONs
Magnification ...... 3x (1st gen.+), 5x (2, 3, 4, gen)
intensifier Tube.......................
1, 2+, CgT, HPT,
WPT, 3, 3a, 3P and 4
lens system ........... 6 (9)elements; F1.7 , 90mm
Field of view ................................................... 14°
range of Focus ..................................... 5 m to
∞
Power supply ..........................2x 3 Cr123a type
Battery life ............................60 hours (gen.2+);
50 hours (gen.3 and gen. 4)
Operating Temperature ...............-40°C to +50°C
storage Temperature .................. -50°C to +70°C
dimensions .................. 200mm x 60mm x 60mm
Weight ........................................................0.8 kg
• Great for hunting, camping, boating
or surveillance
• Total darkness technology
• Automatic brightness control
• Built-in IR illuminator
• Manual focus
• Adjustable eyepiece
• Available IITs:
1, 2+, CgT, HPT, WPT, 3,
3a, 3P and 4
• Rugged and versatile design
• Light weight and comfortable
• Water and dust resistant
• Smart Technology - see description
• Superb 3X (5x) lens system
• Optional Doubler allows
6x (10x) magnification
• Soft case
• Two-year warranty
* aTN reserves the right to change the above specifications at any time without notice
fEATuREs
