30
F
Page 30
5.3
Cleaning and sterilizing the unit
surface
Always disconnect the device from the power line, before
cleaning and disinfecting the surface.
Wipe the surface clean with a cloth soaked in a cleaning
solution or disinfectant. Liquids must not enter the device.
All of the cleaning solutions and disinfectants listed below
can be used.
Should liquids have penetrated into the device, it must
be inspected by an authorized service technician before
being used again.
Recommended instrument disinfectants
Disinfectant
Ingredients
(in 100 g)
Manufacturer
GIGASEPT FF
succinic acid dialdehyde
11.0 g
Schülke & Mayr, Norderstedt
(concentrate)
dimethoxy tetrahydrofurane
3.0 g
corrosion protection components
non-ionic tensides and odoriphores
Sekusept PLUS
glucoprotamine
25.0 g
Henkel, Düsseldorf
(concentrate)
non-ionical tensides
dissolvents, complexing agents
Mucozit-T
bi3 (3-aminoprophyl)laurylamine
8.0 %
Merz & Co., Frankfurt/Main
(concentrate)
alkyldimethylbenzylammoniumchloride
19.0 %
cocospropylendiamine-1,5 guanidinium-acet.
7.0 %
Recommended surface disinfectants
Disinfectant
Ingredients
(in 100 g)
Manufacturer
TERRALIN
Benzal conium chloride
20 g
Schülke & Mayr, Norderstedt
(Concentrate)
Phenoxypropanole
35 g
QUATOHEX
Didecyl dimethyl
Braun, Melsungen
(Concentrate)
ammonium chloride
14 g
Benzal conium chloride
10 g
Bi-guanidinium acetate
7,5 g
Polymer biguanid
0,5 g
Cleaning agents
Incidin Plus
Glucoprotamin
26,0 g
Henkel, Düsseldorf
(Concentrate)
Nonionic tensides
Solvents, complexing agents
Pursept-A
Ethanol
38,9 g
Merz & Co., Frankfurt/M.
(Disinfectant spray or
Glyoxal
0,1 g
disinfectant cloths)
QAV
0,05 g
UK
5.0