Atmel XMEGA B, Руководство пользователя, Страница: 85 / 415

85 XMEGA B [DATASHEET]
8291B–AVR–01/2013
7.9 Register Description
–
Clock
7.9.1 CTRL – Control register

Bit 7:3 – Reserved
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to zero
when this register is written.
 Bit 2:0 – SCLKSEL[2:0]: System Clock Selection
These bits are used to select the source for the system clock. See Table 7-1 for the different selections. Changing the
system clock source will take two clock cycles on the old clock source and two more clock cycles on the new clock
source. These bits are protected by the configuration change protection mechanism. For details, refer to
“Configuration
Change Protection” on page 14 .
SCLKSEL cannot be changed if the new clock source is not stable. The old clock can not be disabled until the clock
switching is completed.
Table 7-1. System clock selection.
7.9.2 PSCTRL – Prescaler Control register
This register is protected by the configuration change protection mechanism. For details, refer to “Configuration Change
Protection” on page 14 .

Bit 7 – Reserved
This bit is unused and reserved for future use. For compatibility with future devices, always write this bit to zero when this
register is written.
Bit 7 6 5 4 3 2 1 0
+0x00
– – – – – SCLKSEL[2:0]
Read/Write R R R R R R/W R/W R/W
Initial Value 0 0 0 0 0 0 0 0
SCLKSEL[2:0] Group configuration Description
000 RC2MHZ 2MHz internal oscillator
001 RC32MHZ 32MHz internal oscillator
010 RC32KHZ 32.768kHz internal oscillator
011 XOSC External oscillator or clock
100 PLL Phase locked loop
101 — Reserved
110 — Reserved
111 — Reserved
Bit 7 6 5 4 3 2 1 0
+0x01
– PSADIV[4:0] PSBCDIV
Read/Write R R/W R/W R/W R/W R/W R/W R/W
Initial Value 0 0 0 0 0 0 0 0