Atmel STK200, Руководство пользователя

Страница: 23 / 40

STK200 Starter Kit 7-1
Section 7
Device Programming
7.1 Device
Orientation
Before programming a device using the programming module, the device must be
inserted correctly into the programming unit. The AVR device has an arrow printed on it,
which points towards pin 1 of the device. Below are the four socket types and their ori-
entation.
8-Pin Devices
20-Pin Devices
28-Pin Devices
40-Pin Devices
Another method of checking to see if it is inserted correctly is to check the notches on
both the device and the programming socket. At the end of the device you will notice a
notch cut-out. There is a notch cut-out on the device socket which is also printed on the
board. The notch on the device must correspond with the notch in the socket.
The orientation of the device is vitally important. If you put it in the wrong way then you
may damage the device. Do not plug a device in with the power switched on or you
may damage it. Similarly, never remove the device with the power on.
PIN 1
PIN 1
28
PIN 1
PIN 1