It offers a set of features that enables the ATSAME70Q21 user to get started with the SAM V71, SAM
V70, SAM E70 and SAM S70 peripherals right away and to get an understanding of how to integrate the
device in their own design.
The SAME70-XPLD board is equipped with the interface connectors described in
.
Table 1-3 SAME70-XPLD Board Interface Connectors
Header
Interfaces to
J302
USB A device. Supports USB device using a Micro-AB connector
J400
Camera Interface Connector (not populated)
J401-J402 Atmel XPRO expansion connectors
J403
Connector for Trace (not populated) (Footprint available on bottom side)
J406
JTAG, 20-pin connector
J500–J507 Expansion connectors with Arduino R3 compatible PIO signals (not populated)
J600
SD/MMC connector (available on bottom side)
J700
Ethernet ETH1
J900
Debug USB interface. Supports USB device using a Micro-AB connector. Interface used for
target debug
Figure 1-2 SAME70-XPLD Board Overview
Atmel SAME70-XPLD [USER GUIDE]
Atmel-44050A-SAME70-XPLD_User Guide-12/2015
5
Содержание SAME70-XPLD
Страница 53: ...Figure 6 3 Top Signals Layer Atmel SAME70 XPLD USER GUIDE Atmel 44050A SAME70 XPLD_User Guide 12 2015 53 ...
Страница 54: ...Figure 6 4 Layer 2 Ground Atmel SAME70 XPLD USER GUIDE Atmel 44050A SAME70 XPLD_User Guide 12 2015 54 ...
Страница 55: ...Figure 6 5 Layer 3 Power Planes Atmel SAME70 XPLD USER GUIDE Atmel 44050A SAME70 XPLD_User Guide 12 2015 55 ...
Страница 56: ...Figure 6 6 Bottom Signals Layer Atmel SAME70 XPLD USER GUIDE Atmel 44050A SAME70 XPLD_User Guide 12 2015 56 ...