Getting Started Guide for ATWINC1500 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42417A-Getting-Started-Guide-for-ATWINC1500WiFi-using-SAMD21-Xplained-Pro_UserGuide_032015
2
3
23
SUCCESS firmware download. The following information will be displayed on the com-
mand window.
SAMD21 flashing script: please connect edbg and power up the board.
Firmware check OK
Chiperase completed successfully
Firmware check OK
Programming completed successfully.
Mode UART
Can not find image_builder path...
Downloading Image...
********************************************
* >Programmer for WINC1500 SPI Flash< *
* Owner: Atmel Corporation *
********************************************
>>Init Programmer
Detecting ports...
EDBG Virtual COM Port(COM4)
(APP)(INFO)WINC1500 Serial Bridge Found
Avail port COM4
1 of ports found
. . .
>Start erasing...
Done
#Erase time = 4.633000 sec
>Start programming..
Done
#Programming time =6.661000 sec
Image downloaded successfully.
>>This task finished after 11.42 sec
OK
#######################################################################
## ##
## ######## ### ###### ###### ##
## ## ## ## ## ## ## ## ## ##
## ## ## ## ## ## ## ##
## ######## ## ## ###### ###### ##
## ## ######### ## ## ##
## ## ## ## ## ## ## ## ##
## ## ## ## ###### ###### ##
## ##
#######################################################################
Downloading ends successfully
