Getting Started Guide for ATWINC1500 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42417A-Getting-Started-Guide-for-ATWINC1500WiFi-using-SAMD21-Xplained-Pro_UserGuide_032015
2
1
21
4
How to Debug ATWINC1500 Wi-Fi Firmware
ATWINC1500 Xplained Pro board provides UART interface for debugging. You can connect the ATWINC1500
Xplained Pro board to your PC using a USB-to-Serial device and a debug USB connector to get firmware
debug information.
Open the ATWINC1500 DEBUG USB serial COM port, with the following settings:
115200 bauds
8 bit data
No parity
One stop bit
No flow control
Open a serial terminal tool to see the result. (ATWINC1500 Wi-Fi Firmware Debug information.)
(1)Chip ID = 1502b1
(1)Flash ID = c21320c2, Size = 4 MBit
(1)Working Image offset = 0x3000 Rollback = 0x40000
(2)(M2M)(Efuse) successfully loaded from bank 1.
(2)EFUSE:MAC
(2)(M2M)MAC_ADDR = F8:F0:05:20:AE:BF
(3)NMI M2M SW VERSION 18.0
(3)NMI MIN DRV VERSION 18.0
(3)Built at Jan 19 2015 23:48:51
(3)__ROM_FIRMWARE__
(4)(M2M)LOAD SEC
(6)(M2M)1000 400 2f000 2fc00 38000
(7)(M2M)Wifi Connect
(7)(M2M)SSID : NW01
(7)(M2M)AUTH : WPA-Personal
(7)(M2M)PSK : nmisemi2
(8)(M2M)Channel : 256
Wi-Fi driver version and
Firmware version
