Getting Started Guide for ATWINC1500 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42417A-Getting-Started-Guide-for-ATWINC1500WiFi-using-SAMD21-Xplained-Pro_UserGuide_032015
1
7
17
5. You will be asked to select your debug tool:
6. Select EDBG and SWD (Serial Wire Debug) as Interface.
7. Click again on the Start Debugging and Break icon:
8. The application will be programmed in the SAM D21 embedded flash and breaks at main function. Click
on continue to execute the application:
You may be asked to upgrade your EDBG firmware. If so, click on Upgrade button:
Upgrade operation may take a few minutes,
wait
for the operation to complete.
The example is now programmed and running.
