manualshive.com logo in svg

Atmal FPSLIC STK594, Руководство пользователя

Поделиться
Скачать
Atmal FPSLIC STK594 Скачать руководство пользователя страница 13

Installing System Designer

3-2

FPSLIC STK594 User Guide

2819D–FPSLI–11/04

3.2

System Designer 
Installation

This installation assumes that you have no previous version of System Designer
installed in your machine. If you have a previous version of the software installed or you
need step-by-step installation instructions, please refer to the System Designer “Installa-
tion, Licensing and Troubleshooting” tutorial available on the Atmel web site.

1.

Insert the supplied System Designer CD-ROM into the computer. If the CD does 
not automatically start, execute 

SETUP.EXE

 from the CD. 

2.

From the CD Browser, select Install Products and select System Designer. The 
System Designer installation will perform a full installation, as there are no 
optional components.

Note:

Do not install System Designer to a directory name that contains spaces, other-
wise improper opperation will occur.

Note:

When you reach the portion of the System Designer installation prompting 
about licensing, you should select one of two options, either Custom or Skip. 
Select Custom if you already have a valid license and follow the instructions 
outlined in Section 3.4.2 “Configuring the System Designer License”. Choose 
Skip if you do not have a license and follow the instructions in Section 3.4.1 
“Requesting a System Designer License”.

Note:

AVR Studio

®

 version 3.2 or higher is required for STK500/STK594 support.

3.3

Configuration 
Programming 
System (CPS) 
Installation

From the CD Browser, select Install Products and select CPS for AT17 Devices. This
will install the CPS utility, which is used to program the AT17 and ATFS series configu-
ration memories found on the STK594.

Note:

When installing the CPS utility, it is necessary to install the software in an 
account with Administrator privileges if the operating system is WindowsNT or 
Windows 2000/XP.

3.4

System Designer 
Licensing

The licensing of System Designer is for the Mentor Graphics tools. You can use System
Designer without a valid license, however you will not be able to use ModelSim

®

,

LeonardoSpectrum

™

 or Co-Verification.

The typical license is based on the hostID of your Network Interface Card (NIC). If you
prefer to use a dongle-based license, it is necessary that you purchase a Security Don-
gle from Atmel (Atmel Part Number: ATDH94DNG). 

The instructions below describe the configuration of a NIC-based license. If you request
a dongle-based license, you will receive instructions on how to configure the license with
the dongle. If you wish to use a single license for multiple machines, it is necessary to
purchase a Security Dongle.

3.4.1

Requesting a 
System Designer 
License

Prior to obtaining a license for System Designer, it is necessary to first install the System
Designer software suite. During installation, System Designer creates the file

LMUTIL.TXT

, which is found in the 

C:\SystemDesigner\ETC

 directory, assuming a

default installation. The 

LMUTIL.TXT

 file contains the hostID of your NIC, and is com-

posed of a combination of twelve alphanumeric characters.

Once you have installed System Designer, proceed to the FPSLIC section of the Atmel
web site and click on the Request License button, alternatively the direct link for the
license request page is http://www.atmel.com/atmel/products/prod39r.htm.

Note:

The Serial Number is located on the white sticker on the underside of the 
STK594 board or on the System Designer case.

Содержание FPSLIC STK594













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды