www.atlona.com | toll free:
1-877-536-3976
For International: 1-
408-962-0515
4
PANEL DESCRIPTION
1. EDID switch: Four EDID setting.
Below is the mode definition chart.
Mode
Select
EDID Fuction
Use
1
2
1
↑
↑
Copy TV EDID
DisplayPort Monitor(s) connected
2
↑
↓
640x480 MODE
Apple 24” & 27” iMacs connected
3
↓
↑
1920x1200 MODE
Apple 24” iMac(s) connected
4
↓
↓
2560x1440 MODE
Apple 27” iMac(s) connected
2. LINK LED: When the device detects the display and sends out the signal the Link LED will illuminate.
3. SYNC LED: When the device detects the source signal the SYNC LED will illuminate.
4. Power LED: The LED will illuminate in green when power on and in red when in standby mode.
5. Reset button: Press this button to reset your EDID after each EDID setting.
1. USB OUT: Connect a USB A type cable to the display monitor or PC/notebook for audio & USB signal
bypass.
2. USB IN: Connect a mini USB cable from your PC/notebook for power and pass-though
3. MINI-DP OUT 1 & 2: Connect the MDP cable or MDP to DP cable to your MDP/DP input display for
displaying a single source on two screens simultaneously.
4. MINI-DP IN: Connect the MDP cable or MDP to DP cable from the MDP/DP source for signal sending.
1. Front Panel
2. Rear Panel
