AT-HDVS-150-RX
23
Menu System
Setting
Description
F/W
Indicates the firmware version of both the transmitter (TX) and receiver
(RX). If the TX is not connected, then “Unknown” will be listed next to
the TX field.
HV Total
The total number of horizonal and vertical pixels.
HV Display
The display resolution.
HV Polarity
Polarity of both the horizontal and vertical sync pulse.
Scan Mode
The scan mode - either progressive or interlaced.
Type
The type of video signal.
HDCP
Indicates whether or not if HDCP content is present.
Clock
Indicates whether the source status of
the TMDS clock is detected (On)
or has been lost (Off).
Sync
Indicates whether the source status of the
TMDS sync is detected (On) or
has been lost (Off).
Identity
Displays the detected resolution of the source.
Type (Audio)
Displays the audio format.
SR (Audio)
Displays the sampling rate of the audio signal.
FIFO (Audio)
Displays the status of the FIFO audio buffer.
The
System Reset
menu provides the ability to reset the AT-HDVS-150-RX to factory-default settings.
1. Under the
Main Menu
, highlight the
System Reset
menu item using the
UP/DN
buttons on the front panel.
2.
Press the
MENU
button.
3. The
System Reset
menu will be displayed.
4.
Press the
UP/DN
buttons to highlight the desired option.
5.
Press the
MENU
button to confirm the selection.
6.
Highlight the
Menu Back
option, then press the
MENU
button to return to the
Main Menu
.
System Reset
No
Yes
Menu Back
System Reset
