5
Wall Plate Installation
US
UK
The HDTX-WP will fit in any 2 Gang (US or UK) electrical box or mud ring (that is at least 40mm
deep).
Important:
To use the power, RS-232, or IR ports on the wallplate a mud ring or 3 gang back box
with custom plate will need to be used.
When installing the US version, use the four shorter screws. Thread the screws through the face
plate into the back box (as shown above).
Note:
Be sure to plug the CAT cable into the back of the wall plate before full installation
The UK wall plate screws will be the longer than the US screws. Thread the screws through the two
holes in the UK wall plate and into the back box (as shown above).
Note:
Be sure to plug the CAT cable into the back of the wall plate before full installation
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515