AT-HDR-M2C
25
IPDHCP
Enables / disables DHCP mode on the AT-HDR-M2C. on = enables DHCP mode; off = disables DHCP mode;
sta = displays the current IPDHCP setting. If this feature is disabled, then a static IP address must be specified for
the AT-HDR-M2C. Refer to the
IPStatic
command.
Example
IPDHCP on
Syntax
IPDHCP X
Parameter
Description
Range
X
Value
on, off, sta
Feedback
IPDHCP on
Commands
IPLogin
Enables / disables the use of login credentials when starting a Telnet session on the AT-HDR-M2C. If this feature is
set to on, then the AT-HDR-M2C will prompt for both the username and password. Use the same credentials as the
web GUI. on = login credentials required; off = no login required; sta = displays the current IPLogin setting.
IPPort
Sets the Telnet listening port for the AT-HDR-M2C. Use the
sta
argument to display the current port setting.
Example
IPLogin off
Example
IPPort 23
Syntax
IPLogin X
Syntax
IPPort X
Parameter
Description
Range
X
Port
0 ... 65535, sta
Parameter
Description
Range
X
Value
on, off, sta
Feedback
IPLogin off
Feedback
IPPort 23
