5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Tip (+)
Analog Audio
A captive screw analog audio connector is provided to ensure a more reliable and secure
connection. The captive screw connector supports balanced and unbalanced audio output.
Balanced audio connections use two signal wires and a ground to minimize interference to audio
signals. Unbalanced audio connections use one signal wire and a ground and are used if other
system components don’t support balanced signals.
Important!
With unbalanced connections a jumper is needed between ground and negative to reduce noise
Note:
Pin outs may vary, please refer to the audio device’s manual to ensure a correct connection.
Important!
When terminating cables, please ensure exposed adjacent wires do not touch. This may result in
a short that can damage connected devices.
XLR
RCA
Sleeve (
Ground)
+
+
2 ( + )
3 ( - )
1 ( )
+
+
-
-
-
-
L / R
BALANCED
UNBALANCED
L / R
+
+
+
+
-
-
