11
The Configuration Page allows non-admin users to be added or the admin password to be
changed.
Only 3 non-admin users can be added. Type in the username and password to the fields and press
add. Users will not have the ability to access this page.
Admin username and password
(default username=”root” and password=”Atlona”)
can also be changed.
Be sure to write this information down as admin is the only profile allowed to add/remove users.
Network
Network
IP Mode - Static or DHCP
Static - IP, netmask, gateway, and telnet port can be set to any settings compatible
with your network. The Netmask and Gateway must match your existing
network
settings
Note:
For a stable connection when using a control system, it is best to set up a static IP. As you select
an IP address, make certain no other devices on your network are using that IP address.
DHCP - Dynamic Host Configuration Protocol will select an IP address on the network
that is not already in use
Telnet Login Mode - Turn on/off - requires a password to adjust settings
Telnet Timeout - Set the auto log-off time between 1 and 3600 seconds
Broadcast - Turn on and off the feedback through all control ports
Reset to Default - Reset the device to factory settings
Firmware Update - Use this feature to find and load the file to the unit.
Note:
Firmware can be found, downloaded, and saved from http://www.atlona.com/AT-HD-SC-500 page
under the firmware tab
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
