REV: 10-12
DOC: 1310B
PAGE
2
INSTALLATION INSTRUCTIONS
LC372 SOUND REINFORCEMENT MODULE
The LC372SR is powered via Ethernet cable from a LANcom power injector located near the device or in a remote tele-
communications closet along with other data switch and distribution equipment.
An internal fan and cabinet vents help keep the internal circuitry cool during operation.
Contractor setup software tools are provided for device configuration and DSP adjustment. The LC372SR is controlled
using standard web browsers on staff or administration computers. Controls include program input selection and volume
for all local inputs and the selected program source.
Wireless Microphone
The LC372SR classroom sound reinforcement module is designed to work with the AtlasLearn infrared microphone. The
versatile and ergonomic pendant/handheld microphone transmitter allows both teachers and students freedom of move-
ment without bulky electronics or cumbersome wires. The dual mode transmitter allows teachers to control microphone
volume, overall system volume and mute settings via side mounted soft touch controls. In addition, when PANIC and
MODE controls are pressed simultaneously a contact closure is triggered that integrates with the rest of the IED LANcom
SCS to signal an emergency condition in the classroom.
The wireless microphone may be used in any of three configurations.
Handheld
Separate LED clusters located on top and bottom of unit guarantee optimum
line of sight operation when the unit is handheld.
Lanyard
Secure connection features a safety breakaway function for easy release in an
emergency and includes an innovative ID badge clip system.
Body Pack
Allows hands free use with optional headset mic.
Charging Station
The SRM also comes with a charging station for charging up to two (2) pendant transmitters and four additional AA
rechargeable batteries simultaneously. The unit may be wall mounted via integral key hole slots or shelf mounted for
easy accessibility.
Mounting Options
The LC372SR has the ability to be surface, rack, wall, or pole mounted. Four (4) rubber feet are included for surface
mounting while other mounting options are accomplished with the use of one of the available optional kits:
LC372RMK
Rack Mount Kit for SRM for equipment rack mounting in 1RU, 15” minimum
depth cabinets
LC372WMK
Wall Mount Kit for SRM for bracket mounting to walls, cabinets, or other
vertical areas.
LC372PMK
Pole Mount Kit for SRM for mounting on standard projector poles up to 2” in
diameter
