©20
19
Atlas Sound LP
. T
he
Atlas
“Circle
A”
, Soundolier
, and
Atlas Sound are trademarks of
Atlas Sound L.P
. IED is a R
egistered
Trademark of Inno
vativ
e Electronic Designs LLC.
All rights reser
ved.
All other
Trademarks are propert
y of their respectiv
e o
wners. No endorsement is implied. Due to continual product de
velopment, specifications are subject to c
hange without notice.
ATS0
05966 R
evA 5/1
9 D
OC1
227B
AtlasIED.com
TELEPHONE: (502) 267-7436
9701 TAYLORSVILLE ROAD
LOUISVILLE, KENTUCKY 40299 U.S.A.
Connecting Supervised Logic Inputs
In order to supervise logic inputs, it is necessary to provide external 10k Ohm resistors (not provided) on or near the remote device as shown in the
figure below.
Connecting Unbalanced Audio Inputs / Outputs
The analog audio inputs / outputs on the 1544ZOP are balanced. On occasion, it may be necessary to connect unbalanced audio devices to the
1544ZOP. When doing this, one should wire as shown in the figure below.
Connecting a Power Supply
A suitable power supply should be connected to the rear connector, being careful to observe the polarity shown on the connector. Suitable power
supplies are any supply capable of supplying at least 10 Watts of power. For example, a 12V, 1 Amp supply or a 48V,
1
/
4
Amp supply. Possible supplies
that may be ordered separately from AtlasIED and used for this purpose include:
• IED1112PS rack mount, 5-output power supply, with optional redundant supply,
• IED1112MPS-MOD, single unit power supply.
Complete Unit Configuration
Once the unit is booted up, complete the system configuration using GLOBALCOM.IP System Management Center (SMC) software, as part of overall
system configuration.
