Operating Manual Xenotest
®
440
- 42 -
Inhalt/Content/Sommaire
6.9 Interfaces
Fig. 35:
The Xenotest
®
440 instrument is equipped with four in
-
terfaces for exchanging data with external systems.
Network connection
1
:
The test instrument can be integrated into a network via
the Ethernet port (see Software Documentation sect.
“Add-ons”).
Serial interface
2
:
The RS232 interface enables measured data to be out
-
put during an ongoing test program on a computer.
USB interface
3
:
Data interface according to the USB 2 standard. Mea
-
sured data can be output to a computer via this interface
during an ongoing test program. Only available with later
versions of the software.
Slot
4
for memory card
5
:
For updating installed instrument software, loading new
test programs or downloading measuring and test data.
The
light emitting diode (LED)
6
illuminates when
data is transferred to the memory card.
NOTE – data loss
The memory card should not be removed from the slot
when the LED is illuminated.
1
2
3
4
6
5
Fig. 35
6
Start up
