Atlas TC255, Руководство по установке и эксплуатации

Страница: 28 / 42

Operation 28
TC255
5.4 Mounting The Tire
It is of utmost importance to check the tire and rim to
prevent tire explosion during the infl ating operations. Before
beginning mounting operation, make sure the tire and cord
fabric are not damaged.
Make sure the diameter of the rim and tire are exactly the
same.
Keep hands and other parts of the body as far as possible
from the tool arm when the spindle fl ange is turning.
During arm tilting make sure that nobody stands behind the
tire changer.
• Lock the rim on the spindle fl ange as described above in this chapter.
• With the special grease carefully lubricate the whole inner surface of
the rim and the tire beads, both externally and internally around the
circumference for thickness of 1” (ref. fi g.13).
• Place the tire horizontally on the rim.
• Lower the mounting head so that the rear section of the mounting head
rests on the rim edge (ref. fi g.14).
• Position the tilted tire towards a 3 o’clock position (ref. fi g.14).