General Information
9
TC255
2.3
Description Of Controls
2.3.1 Pedals On Front Panel
PEDAL “L”
This pedal is used to tilt back the vertical arm out of the working position.
PEDAL “M”
This pedal is used to rotate the spindle clockwise or
anticlockwise, in slow or fast rotation mode.
PEDAL “N”
This pedal is used to lift the tire from the ground onto
the spindle fl ange or lower it back down to the ground.
2.3.2 Control
Panel
SELECTOR “A”
• When it is selected into LOCKING position, the horizontal movement of the
bead breaker carriage is restricted, and in the meantime the button (C) is
activated.
• When it is selected into UNLOCKING position, the bead breaker arm can
have the normal movements horizontally.
CONTROL LEVER “B”
• When it is pushed leftwards, the bead breaker
carriage moves forwards.
• When it is pushed rightwards, the bead breaker
carriage moves backwards.
BUTTON “C”
• This button works only when the selector (A) is
set in LOCKING position.
• When it is pressed, the bead breaker carriage
makes an over stroke: moves forwards about 1”.
• When it is released, the bead breaker carriage moves back to the initial
position automatically.
Содержание TC255
Страница 1: ......
Страница 15: ...Installation 15 TC255 Fig 2 A ...
Страница 39: ...Electric And Pneumatic Diagram 39 TC255 Electric And Pneumatic Diagram 220V 230V 1PH ...
Страница 40: ...Electric AndPneumatic Diagram 40 TC255 Pneumatic System Diagram ...