Atlas AE 60, Руководство по эксплуатации

Страница: 5 / 16

PennEngineering • www.pemnet.com
5
Make sure that the couple tie-rod/head mounted on your riveting tool is suitable for the insert to clamp;
otherwise, change size accordingly. Usually the riveting tool is supplied with the couple tie-rod/head
corresponding to a M8 thread. Before using the riveting tool and after any change of size, perform the
following operations according to the size and thickness of the part to clamp. Adjust the riveting tool stroke
to the minimum by turning the ring nut “G” to “–” marked on the tool. Place the insert onto the tie rod and
push slightly on it so as to make it clamp automatically. Make sure the insert head touches the riveting tool
head properly. Fasten the insert and in order to ensure a proper clamping of the material, adjust the riveting
tool stroke by turning the ring nut “G” accordingly. By increasing stroke, i.e. by turning the ring nut “G”
to “+”, the distance “H” between head and insert deformation will decrease and clamping will result more
effective.
WARNING!!! A WRONG ADJUSTMENT OF THE RIVETING TOOL STROKE MAY CAUSE A FAULTY
CLAMPING OF INSERTS AND MAY BRAKE THE TIE ROD!
OPERATING INSTRUCTIONS