Atlas AE 60 Скачать руководство пользователя страница 4

Страница: 4 / 16

PennEngineering • www.pemnet.com

• Working pressure............................................................................................................................. 6 BAR

• Min. int. diam. of the compressed air feeding hose.........................................................min. diam = 8mm

• Air consumption per cycle................................................................................................................ 3.6 Lt.

• Max power......................................................................................................................... 6 BAR -14224 N

• Weight.......................................................................................................................................... 2.130 Kg

• Working temperature................................................................................................................... -5˚/+50˚C

• Root mean square in total acceleration frequency (Ac)

to which the arms are subjected............................................................................................ < 2.5 m/sec

• A-weighted emission sound pressure level..................................................................................... 70 dBA

• Peak C-wdighted instantaneous sound pressure......................................................................... <130 dBC

• A-weighted emission sound pressure.............................................................................................. 88 dBA

AIR FEED

The air feed must be from foreign bodies and humidity in order to protect the tool from premature wear

and tear of the components in movement, therefore we suggest to use a lubricative group for compressed

air.

TECHNICAL DATA

Содержание AE 60

















Результаты поиска

Содержание AE 60

Отзывы:

Бренды по названию

Популярные бренды

Atlas AE 60, Руководство по эксплуатации

Результаты поиска

Содержание AE 60

Отзывы:

Бренды по названию

Популярные бренды