Atlas 4143400-MT, Руководство по эксплуатации

Страница: 39 / 48

PennEngineering • www.pemnet.com 39
Instruction Manual - RIV938
TOOL PREPARATION AND SCREW REPLACEMENT
Warning: Tool setting and screw replacement must be carried out with the tool disconnected from the air supply
line.
Simultaneously press
the two pins sliding
them into the hole and
unscrew the ring.
There must be a distance
of .060” / 1.5 mm
between the casing
and the nut for motor
screwing.
Ø 1.02” /
26 mm
2.76” /
70 mm
To replace screws you have to carry out the following operations:
Unscrew the toothed ring 1 from the tool. Insert joint 2. Insert screw 3. Insert screw adapter 4.
Screw the toothed ring 1 making sure that the screw (or tie rod) moves freely, then try and find
the most suitable joint (see indented ring). Screw on 5 and 6.
TO UNSCREW THE KIT HOLDER QUICK RING