– 11 – AtlasIED.com
Specifications are subject to change without notice.
Install Instructions
IPUSBD-1 & IPUSBD-4
USB Dante Network Audio Device
9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A.
Telephone: 502.267.7436 • Fax: 502.267.9070
Installation
IPCSD1/IPCSD4 Attached to Standard 2-Gang Electrical Box
The IPCSD1 and IPCSD4 are designed to fit on a standard 2-gang electrical box. Install the unit into a box as shown in Figure 3 below.
This is the preferred installation method for wall mounting or any other flush-mount applications. When this mounting method is used,
the included plastic back box should be removed and stored for any future needs and use the included screws for mounting the device
in the 2-gang electrical box.
IEDA520DTB Desktop Base
The IEDA520DTB is available as an option when a desktop mounting solution is preferred. The IPCSD1/IPCSD4 ships with the plastic
back box that can be attached to the unit as shown in Figure 4 below. The unit is then secured to the base by tightening the retaining
screws using the nuts located on the back of the base mounting plate. The microphone station can be removed from the base by
loosening the retaining screws using the nuts located on the back of the base mounting plate. The plastic box contains keyhole slots,
so the screws can be loosened enabling the unit to slide up and be removed from the base. The DIP switches can then be accessed
and the cables can be connected before reattaching the communication station to the base. Simply tighten the retainer screws with the
nuts to secure the unit to the base.
Figure 3: Components in the Included Rack Mount Kit
Figure 4: IEDA520DTB Desktop Base Installation
