AtlasIED.com
– 12 –
Specifications are subject to change without notice.
Install Instructions
IPCSD1 & IPCSD4
Dante
™
Digital Communication Stations
9701 Taylorsville Rd. • Louisville, KY 40299 U.S.A.
Telephone: 502.267.7436 • Fax: 502.267.9070
Alternative Single-Gang Electrical Box Installation
The IEDA524-H is shipped with a plastic back box that can be used if the installation does not allow for the recommended 2-gang
electrical box installation. This box can also be used later if the unit needs to be mounted to a desktop base. The box has two keyholes
that fit a standard single-gang electrical box hole pattern. This allows the unit to be easily installed in applications where single gang
boxes may already be installed. The box provides a slight forward slant which is excellent for surface mounting the unit in a console.
Figure 5 illustrates the process for mounting the unit in such an application. The washers shown are optional and can be used to
prevent the unit from being forced off of the box due to the keyhole mounting points.
Figure 6 illustrates an alternative mounting option where the box has been rotated 180˚ to provide a slight backward slant to the
microphone station. In this case, you must use appropriately sized washers when attaching the box to the electrical box to prevent it
from sliding off due to the keyhole mounting points. When the plastic box is attached in this orientation, you will need to make any
connections prior to placing the unit in the box. Use care when routing the cables as the clearance between the connector and the box
is minimal.
Complete Unit Configuration
The IPCSD1/IPCSD4 units have no separate configuration. They are configured and controlled entirely from the GLOBALCOM
®
.IP
controller by adding them into the system project definition. See the System Management Center (SMC) user manual or online help for
specifics related to this.
Figure 5 Alternate Single-Gang Electrical Box Method A
Figure 6: Alternate Single-Gang Electrical Box Method B
