Atlas Copco XRVS 1300 CD7 Скачать руководство пользователя страница 78

Страница: 78 / 102

- 78 -

Problem: Compressor overheating.

Alternator precautions

1. Never reverse the polarity of the battery or the

alternator.

2. Never break any alternator or battery connections

while the engine is running.

3. When recharging the battery, disconnect it from

the alternator. Before using booster cables to start
the engine, be sure of the polarity and connect the
batteries correctly.

4. Never operate the engine without the main or

voltage sensing cables connected in the circuit.

Possible faults

Corrective actions

Insufficient compressor cooling.

Locate compressor away from walls; when banked with other compressors, leave space
between them.

Oil cooler clogged externally.

Clean oil cooler. Refer to section Cleaning coolers.

Oil cooler clogged internally.

Consult Atlas Copco.

Oil filters clogged.

Replace oil filters.

Oil level too low.

Check oil level. Top up with recommended oil if necessary.

Thermostatic by-pass valve remains stuck in opened position.

Remove valve and check for proper opening and closing. Replace if out of order.

Fan blade(s) broken.

Check and correct if necessary.

Oil stop valve malfunctioning.

Remove and inspect valve.

Oil separator element (OS) clogged.

Have element removed and inspected by an Atlas Copco Service representative.

Содержание XRVS 1300 CD7







































































































Результаты поиска

Содержание XRVS 1300 CD7

Отзывы:

Бренды по названию

Популярные бренды

Atlas Copco XRVS 1300 CD7, Инструкция по эксплуатации

Результаты поиска

Содержание XRVS 1300 CD7

Отзывы:

Бренды по названию

Популярные бренды