Atlas Copco XRVS 1300 CD7, Инструкция по эксплуатации

Страница: 42 / 102

- 42 -
During operation
Regularly carry out following checks:
1. Ensure that the regulating valve (RV) is correctly
adjusted, i.e. starts decreasing the engine speed
when reaching the preset working pressure in the
receiver.
2. Check the air outlet temperature of the
compressor element.
3. Check the engine oil pressure, the coolant
temperature and display of control box.
4. Avoid the engine running out of fuel.
Nevertheless, if this happens, fill the fuel tank and
prime the fuel system to speed up starting.
Set the Pressure/Flow Setpoint
When the controller is in the Main View (shift
between PRESSURE and FLOW VIEW with right/
left arrows):
Press ENTER for 2 seconds, and the middle section
becomes green (setting can be edited)
Press the UP/DOWN arrows to set the requested
pressure/flow.
Press ENTER to confirm the new setting.
Some additional control features are available from
Atlas Copco, such as dual pressure switch, remote
start, auto start, remote pressure setting. If interested,
please consult your Atlas Copco representative for
more information.
The doors must be closed during
operation and may be opened for short
periods for inspection and adjustments
only.
Be aware not to touch hot parts when the
door is open.
When the engine is running, the air
outlet valves (ball valves) must always be
put in a fully opened or fully closed
position.
!
!
MAIN VIEW
LOADED
18.6
1800RPM 18.6bar 41% 1286h
MAIN VIEW
LOADED
18.6
1800RPM 18.6bar 41% 1286h