Atlas Copco XAHS 447, Инструкция по эксплуатации

Страница: 67 / 103

Instruction Manual
66
1092 0381 48
4.6 Oil specifications
High-quality, mineral, hydraulic or synthesized hydrocarbon oil with rust and oxidation inhibitors and anti-foam
and anti-wear properties is recommended.
The viscosity grade should correspond to the ambient temperature and ISO 3448, as follows:
It is strongly recommended to use Atlas Copco branded lubrication oils for both compressor
and engine.
Type of lubricant Compressor Engine
between 30
Centigrade
and 40
Centigrade P
AROIL
S P
AROIL 15W40
between -5
Centigrade
and 30
Centigrade P
AROIL M
PAROIL S
PAROIL 15W40
between -20
Centigrade
and -5
Centigrad e P
AROIL S
P
AROIL 5W30
Never mix synthetic with mineral oil.
Remark:
When changing from mineral to synthetic oil (or the other way around), you will need to do
an extra rinse:
After doing the complete change procedure to synthetic oil, run the unit for a few minutes to
allow good and complete circulation of the synthetic oil.
Then drain the synthetic oil again and fill again with new synthetic oil. To set correct oil
levels, proceed as in normal instruction.