Atlas Copco Secoroc G10, Инструкция оператора и список запасных частей

Страница: 10 / 16

10
Storage
h Always oil the pick hammer before putting it into storage.
h
Store the pick hammer in a clean and dry place.
h In the case of long-term storage, pour a quantity of oil directly into the pick
hammer air intake and then turn on the air briefly. This will protect the machine
from corrosion.
h
Protect the chuck using a wooden plug or a clean piece of cotton waste.
Scrapping and waste disposal
Used and worn-out machines must be disposed of in such a way that as much of
the material as possible can be recycled and the impact on the environment is kept
to a minimum.
Trouble shooting
If the pick hammer does not start, has low power or uneven performance, check the
following points.
h
Check that the inserted tool being used has the correct shank dimension.
h Check that the pick hammer is receiving the correct amount of lubricant.
Too much lubrication can cause starting problems, low power or uneven
performance.
h
Check that the compressed air system supplies the machine with sufficient air
pressure to provide full power.
h Check that the dimension and length of the air hose is in accordance with the
recommendations. See “Preparations before starting”.
h
If there is a risk of freezing, check that the machine’s exhaust ports are not
blocked.
If the machine function is still not satisfactory after this procedure, contact an
authorized service workshop.