Atlas Copco LSV39 S066-M14, Руководство по технике безопасности

Страница: 5 / 144

LSV39 S066-M14 Safety Information
© Atlas Copco Industrial Technique AB - 9834 4398 00
5
Stockholm, 1 December 2021
Carl von Schantz, Managing Director
Signature of issuer
Authorized Representative UK:
Atlas Copco Ltd
Swallowdale Lane
Hemel Hempstead, Hertfordshire HP2 7EA
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
product.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.
Intended Use
This product is designed for removing or polishing material
using coated abrasives or polishing attachments. No other
use permitted.
Product Specific Instructions
General Installation Safety
Installation Overview
Legend to page 2
A)
Recommended torque
B)
Hose length
C)
Hose diameter
D)
Max working air pressure
E)
Max free speed
F)
Recommended torque
G)
Recommended torque
H)
Spindle thread
Installation of Vibrating Tools
We recommend using a minimum length of 300 mm (12") of
flexible hose for compressed air between a vibrating tool and
the quick-action coupling.
Setting-up Instructions
WARNING Risk of Serious Injury or Death
Overspeed can cause serious injury or death!
►
Do not manipulate the speed of the tool.
►
Do not override the maximum speed marked on the
tool.
• Use a pressure regulator to prevent a too high air pres-
sure which can cause overspeed.
• Make sure that connections and the air hose are in good
condition.
General Operation Safety
Before Starting to Work
1.
Free speed check
• The speed, measured at a pressure of 6.3 bars, must
not be higher than the rated speed marked on the
sander.
• Remove the backing pad and outer flange before do-
ing the free speed check.
• Do free speed checks daily and especially after a
long period of no use.
• Make sure that the speed marking on the tool is
readable.
• Return the tool for repair when it is overspeeding.
2.
Trigger check
• Make sure that the trigger works correctly.
• Replace the trigger if it does not work correctly.
• Never remove the trigger or lock it with tape.
3.
Locking kit check