Atlas Copco LSV28S085 Скачать руководство пользователя страница 6

Страница: 6 / 156

Safety Information

LSV28S085

For additional safety information consult:

• Other documents and information packed with this

tool.

• Your employer, union and / or trade association.

• “Safety Code for Portable Air Tools” (ANSI

B186.1), available at the time of printing from
Global Engineering Documents at http://
global.ihs.com/ , or call 1 800 854 7179. In case of
difficulty in obtaining ANSI standards, contact
ANSI via http://www.ansi.org/

• Further occupational health and safety information

can be obtained from the following web sites:

• http://www.osha.gov (USA)

• https://osha.europa.eu/ (Europe)

Air supply and connection hazards

• Air under pressure can cause severe injury.

• Always shut off air supply, drain hose of air pressure and

disconnect tool from air supply when not in use, before
changing accessories or when making repairs.

• Never direct air at yourself or anyone else.

• Whipping hoses can cause severe injury. Always check

for damaged or loose hoses and fittings.

• Do not use quick disconnect couplings at tool. See in-

structions for correct set up.

• Whenever universal twist couplings are used, lock pins

must be installed.

• Do not exceed maximum air pressure of 6.3 bar / 90

psig, or as stated on tool nameplate.

Entanglement hazards

• Keep away from moving sanding pad. Note that the

abrasive will continue to run after the start valve has
closed; for dual action sanders, this can last several sec-
onds.

• Choking, scalping and / or lacerations can occur if loose

clothing, gloves, jewellery, neck ware and hair are not
kept away from tool and accessories.

Projectile hazards

• Failure of the accessory or abrasive, or of the workpiece,

can generate high-velocity projectiles. Even small pro-
jectiles can injure eyes and cause blindness.

• Always wear impact-resistant eye and face protection

when involved with or near the operation, repair or
maintenance of the tool or changing accessories on the
tool.

• Be sure all others in the area are wearing impact-resis-

tant eye and face protection.

• Daily measure the speed of a rotary sander or polisher

with a tachometer to make sure that it is not greater than
the RPM marked on the backing pad, drum or abrasive.

• Ensure that the backing pad / abrasive is securely

clamped to the sander using the tools provided.

• Ensure that the workpiece is securely fixed.

Accessory hazards

• Always shut off air supply, relieve hose of air pressure

and disconnect tool from air supply when changing ac-
cessories.

• Use only recommended sizes and types of abrasives.

• Never use a backing pad, drum or abrasive with a per-

mitted speed lower than the air sander speed.

• Never mount a grinding or cutting-off wheel on a sander.

A grinding wheel that bursts can cause very serious in-
jury or death when not properly guarded.

• Use only coated abrasive sanding discs or sheets prop-

erly secured to the backing pad provided with the air
sander. Ensure that self-fixing sanding discs are mounted
concentrically.

Operating hazards

• Operators and maintenance personnel must be physically

able to handle the bulk, weight and power of the tool.

• Hold the tool correctly: be ready to counteract normal or

sudden movements – have both hands available.

• You can be cut, pinched or burned if you come into con-

tact with the sanding pad, abrasive or the work surface.
Avoid contact and wear suitable gloves to protect hands.

• Inspect backing pad before each use. Do not use if

cracked or broken, or if it has been dropped.

• Never run the tool unless the abrasive is applied to the

workpiece.

• There is a risk of electrostatic discharge if used on plas-

tic and other non-conductive materials.

• When using a tool that is designed to have a guard, the

guard should be in place to offer protection from grind-
ing swarf and other debris.

Repetitive motion hazards

• When using a power tool to perform work-related activi-

ties, the operator might experience discomfort in the
hands, arms, shoulders, neck, or other parts of the body.

• Adopt a comfortable posture whilst maintaining secure

footing and avoiding awkward or off-balance postures.
Changing posture during extended tasks can help avoid
discomfort and fatigue.

• Do not ignore symptoms such as persistent or recurring

discomfort, pain, throbbing, aching, tingling, numbness,
burning sensation, or stiffness. Stop using the tool, tell
your employer and consult a physician.

Noise and Vibration hazards

• High sound levels can cause permanent hearing loss and

other problems such as tinnitus. Use hearing protection
as recommended by your employer or occupational
health and safety regulations.

• Exposure to vibration can cause disabling damage to the

nerves and blood supply of the hands and arms. Wear
warm clothing and keep your hands warm and dry. If
numbness, tingling, pain or whitening of the skin occurs,
stop using tool, tell your employer and consult a physi-
cian.