Atlas Copco LSV28S085, Руководство по технике безопасности

Страница: 53 / 156

LSV28S085 Safety Information
© Atlas Copco Industrial Technique AB - 9836 2582 00
53
• Nopeus ei 6,3 baarin paineessa mitattuna saa ylittää
hiomakoneeseen merkittyä nimellisnopeutta.
• Remove the backing pad and outer flange before do-
ing the free speed check.
• Do free speed checks daily and especially after a
long period of no use.
• Make sure that the speed marking on the tool is
readable.
• Return the tool for repair when it is overspeeding.
2.
Trigger check
• Make sure that the trigger works correctly.
• Replace the trigger if it does not work correctly.
• Never remove the trigger or lock it with tape.
3.
Maximum speed check
• Make sure that the stated maximum speed of the
backing pad and abrasive sheet is higher than or
equal to the speed marked on the sander.
4.
Backing pad check
• Make sure that the backing pad is not cracked or
damaged in any way.
• Make sure that the backing pad have the correct hole
dimensions and is attached correctly on the spindle
to prevent unbalanced vibrations.
• Remove and replace damaged grinding wheels im-
mediately.
5.
Flange and backing pad check
• Always disconnect the air supply when changing the
backing pad or abrasive sheet, or adjusting the tool.
• Make sure that the flange and pad combinations cor-
respond to national regulations.
• Make sure that the flange is clean and not damaged.
• Attach the flange with the recommended tightening
torque.
• Attach the locking kit with the recommended tight-
ening torque.
• Do a test-run of the sander in a protected area after
assembly of the backing pad.
• Make sure that the sander works correctly.
6.
Personal protection equipment
Make sure the operators use:
• Eye protection, goggles or a visor.
• Ear protection
• Gloves
• Steel toe-capped shoes
• Protective clothing, such as a leather apron.
• A helmet (for heavier applications)
• Do not use loosely hanging clothing, hair or jew-
ellery (risk of getting caught).
7.
Working area
Make sure that the working area is kept free from other
people so that no one can get injured.
• People nearby must wear hearing and eye protection.
• Make sure that the ventilation and dust extraction
from the premises are sufficient.
• Make sure that there is a stand or a place available to
put the tool safely.
• Work within a sealed-off area, with protective walls
if possible. There is a risk that broken backing pads
fly off.
During work
Stop using the grinder if abnormally loud noises and vibra-
tions occur during use.