manualshive.com logo in svg

Atlas Copco HiLight H6+ DC, Инструкция по эксплуатации

Поделиться
Скачать
Atlas Copco HiLight H6+ DC Скачать руководство пользователя страница 4

- 4 -

Warranty and Liability Limitation

Use only authorized parts. 
Any damage or malfunction caused by the use of unauthorized parts is not covered by
Warranty or Product Liability.
The manufacturer does not accept any liability for any damage arising from modifications,
additions or conversions made without the manufacturer's approval in writing.
Neglecting maintenance or making changes to the setup of the machine can result in major
hazards, including fire risk.
While every effort has been made to ensure that the information in this manual is correct,
Atlas Copco does not assume responsibility for possible errors.

Copyright 2021, Grupos Electrógenos Europa, S.A.U., Zaragoza, Spain.

Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers and drawings.

00_00_HiLight H6+_EN.book  Page 4  Friday, June 4, 2021  11:52 AM

Содержание HiLight H6+ DC





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды