Atlas Copco Dynapac F1000W T4i, Руководство по эксплуатации и техническому обслуживанию

Страница: 86 / 240

D 1.1 32
D_
1.1_0
1_US.f
m 32-
44
Item Designation Brief description
70 Emergency stop button
In case of an emergency (danger to persons, possible collision, etc.), press
the Emergency Stop button!
- Pressing the Emergency Stop button switches the engine, the drives and
the steering system off.
Paving, lifting the screed or other functions are no longer possible! Do
not reset the Emergency Stop Button until the danger is no longer
present!
- To restart the engine, the button must be pulled out again.
71 Horn
Sound the horn to warn of danger!
NOTE:
The horn can also be used to communicate with the vehicle driver!
72 Left auger pile height
Manually adjusts the percentage of maximum speed in auto mode. If 10% is
selected, then the maximum speed when no material is sensed is 10% of its
highest possible speed. Knob function:
- Turn the knob clockwise to raise the speed.
- Turn the knob counter-clockwise to lower the speed.
73 Right auger pile height
Manually adjusts the percentage of maximum speed in auto mode. If 10% is
selected, then the maximum speed when no material is sensed is 10% of its
highest possible speed. Knob function:
- Turn the knob clockwise to raise the speed.
- Turn the knob counter-clockwise to lower the speed.
74
Left conveyor pile
height
Manually adjusts the percentage of maximum speed in auto mode. If 10% is
selected, then the maximum speed when no material is sensed is 10% of its
highest possible speed. Knob function:
- Turn the knob clockwise to raise the speed.
- Turn the knob counter-clockwise to lower the speed.
75
Right conveyor pile
height
Manually adjusts the percentage of maximum speed in auto mode. If 10% is
selected, then the maximum speed when no material is sensed is 10% of its
highest possible speed. Knob function:
- Turn the knob clockwise to raise the speed.
- Turn the knob counter-clockwise to lower the speed.
76
Left speed manual /
max. output
Overrides the auger and conveyor function automatic mode. Toggle switch
function:
- Toggle the switch away from the operator (upward) to run the au-
ger and conveyor only using the pile height knobs. The material
sensor will not be used.
- Toggle the switch in the center position to run the auger and con-
veyor in auto mode.
- Momentarily toggle the switch towards the operator (downward) to
run the auger and conveyor at full speed.