Atlas Copco Dynapac F1000W T4i, Руководство по эксплуатации и техническому обслуживанию

Страница: 39 / 240

1
C_
1.1_0
1_US.f
m 1-1
6
C 1.1 Transport
1 Safety regulations for transportation
Accidents can happen when the paver and the screed are not properly prepared for
transportation or when transportation is carried out improperly!
Reduce both the paver and the screed to their basic widths. Remove all protruding
parts (such as the automatic levelling system, auger limit switches, aprons, etc.).
When transporting under a special permit, secure these parts!
Close the hopper lids and engage the hopper transport safeguards. Lift the screed
and engage the screed transport safeguards. Convert the protective roof (if equipped)
and engage the latch.
Check that the clamping device for the auger crossbeam is fastened and that the tel-
escopic tube cannot slide out (see chapter E, section 2.5).
Pack all parts that are not permanently fixed to the paver finisher and the screed into
the appropriate boxes and into the hopper.
Close all coverings and check that they are securely seated.
When loading using ramps, there is a risk that the machine will slip, tilt or overturn.
Drive carefully! Keep people away from the danger area!
Additional stipulations for transportation on public roads:
Depending on local regulations tracked pavers must not be driven as self-propelling
vehicles on public roads.
Note the different state and local regulations.
The operator must be in the possession of a valid permit for vehicles of this type.