ENG ENG
10
Thank You for choosing an Atlantis Product. For more detailed instructions on configuring and using this device please
refer to the online manual on the CD-Rom.
1.1
Package Contents
Unpack the package and check all the items carefully. Also, keep the box and packing materials in case you need to
ship the unit in the future. The package should contain the following items: Wireless N Broadband Router, Power
Adapter AC/DC (9V, 0.5A), UTP cat. 5 cable (RJ-45 connector), Quick Start Guide (English, Italian, French), Cd-Rom
with manual(English and Italian) and Warranty Card.
If any item is found missing or damaged, please contact your local reseller for replacement.
1.2
Factory Default Settings
Before you configure this Router, you need to know the following default settings:
Username:
admin
Password:
atlantis
IP address:
192.168.1.253
, Subnet Mask:
255.255.255.0
DHCP Server:
enable
(from
192.168.1.100
to
192.168.1.199
)
WAN=
DHCP Client
ESSID=
A02-RB-W300N
or
A02-RB2-WN
Channel=
Auto
After the device has turned on, press it to reset the device or restore to factory default
settings. The operation is as below:
10 seconds or above:
restore to factory default settings (this is used when you can not
login to the router, e.g. forgot the password)
1.3
Cabling
Plug in one end of the network cable to the WAN port of the Wireless Internet Broadband Router.
Plug in the other end of the network cable to the Ethernet port of the xDSL or Cable modem.
Use another network cable to connect to the Ethernet card on the computer system; the other end of the cable
connects to the LAN port of the Internet Broadband Router. Since the Wireless Broadband Router has four ports, you
can connect up to four computers directly to the unit. There you do not have to buy a switch to connect these
computers since one Internet Broadband Router functions both as a connection-sharing unit and as a switch.
Finally connect the AC-DC Adapter to the Wireless Router and then to the socket. Once you’ve checked all the
connections and you’ve switched on the Wireless Router the product will carry on immediately a autotest (60
seconds). The control LEDs of the Wireless Internet Broadband Router are clearly visible and the status of the
network link can be seen instantly:
With the power source on, once the device is connected to the broadband modem, the Power, LAN, WLAN and
WAN port link LEDs of the Internet Broadband Router will light up indicating a normal status. Led CPU blinks.
While the WAN is link up to the ADSL/Cable modem, the WAN port’s Link/ACT LED will light up.
While the LAN is link up to the computer system, the LAN port’s Link/ACT LED will light up.
LED
Meaning
PWR
This indicator lights blue when the hub is receives power, otherwise it is off.
CPU
This indicator blinks blue means the Internet Broadband Router is working successful.
Otherwise, this indicator always on or off means the function of the Internet
Broadband Router is fail.
WLAN
This indicator blink blue when there are wireless devices connected and transmitting
data to the Wireless Router. This indicatori is off when wireless function is disabled.
WAN (Internet)
These indicators light blue when the LAN ports were connected successfully and blink
blue while the LAN ports were transmitting data.
LAN 1-4
These indicators light blue when the LAN ports were connected successfully and blink
blue while the LAN ports were transmitting data.
Содержание MultiLanguage A02-RB-W300N
Страница 1: ......
Страница 19: ...info atlantis land com ...