3
Any revisions must first be approved by the product designer. Version: 201909
Revision By: JST
1.
PROTECT SHOWER FLOOR
This shower has been supplied with a
polystyrene protective cover. Ensure the
shower base remains protected during glass
installation.
2.
CHOOSE DOOR DIRECTION
3.
WALL CHANNEL INSTALLATION
Two glass receiver channels have been supplied.
The shorter channel measuring 1964mm is to be
installed on the fixed panel side. The longer wall
channel measuring 2013 is to be installed on the
return panel side.
4.
Position the glass receiver channel on the base
glazing channels. Use a
straight edge and
mark the wall to
indicate where the
wall channel is plumb.
5.
Apply a silicon bead to the full length of
channels. Silicon used must be compatible with
anodised aluminium, as well as acrylic or the
waterproofing being used.
6.
Ensure the glass receiver sits firmly on the base
glazing channel. Locate the framing timber. Use
the 4mm drill bit to drill holes through the glass
receiver channels. Fix four screws through the
channels into the wall framing (use wall plugs if
required supplied with
wall channels).
7.
Apply a continuous bead of silicon to the full
length of the channels and waterproofing,
indicated by the dark line (inside channel).
8.
GLASS PACKER PLACEMENT
Apply 2x clear packers
(
BAG 11
) into the
base glazing channels
in locations as shown.