![background image](http://html1.mh-extra.com/html/atlantis/diskmaster-hde104/diskmaster-hde104_multilanguage-manual_3000505028.webp)
28
Step9.
Turn the power “on”.
Hardware installation completed.
Model
A06-HDE104
: Make sure your USB host card
supports USB2.0. If not, this device will only run on USB
1.0 & 1.1 specifications. When Using SATA Hard Disk, it
may require more detection time (around 15 to 30 second)
form your PC.
Model
A06-HDE105:
Make sure your USB host card
supports USB3.0. If not, this device will only run on USB
2.0 specifications.
Step10.
Now installation is complete. Please check the blue LED on the front is on.
Model A06-HDE105:
In the rear part there are 2 LEDs.
USB 3.0 LED will be on only when USB 3.0 is used. This Led
is Off when device works in USB 2.0 compatible mode.
The Spindown LED is on (orange) to indicate the spindown
status of the hard disk. The hard disk will spindown for
power saving after no reading or no writing for 5 minutes.
To wake up the hard disk, just double click on the drive and
it will activate again.