Atlantis Land I-Storm A02-RA, Справочник по командам

Страница: 72 / 112

uptime
version
●
? ●
The key for the above table is shown below:
Symbol Description
●
Yes
—
May be inserted explicitly in //isfs/resolve (Eg. for debugging purposes),
but not saved by ipconfig sav e.
Two obsolescent commands are not shown in the table above nor in the fuller descriptions
below; they are supported only for consistency with older versions of the software:
Command Description
devices Lists devices; equivalent to device with no parameters.
subnets Lists subnets; equivalent to subnet with no parameters.
The hidden commands that are not shown in the ip help output are generally either
commands that are useful for debugging rather than for use by the end-user or commands
of limited utility that are supported mainly for consistency with earlier versions of the
software; it may be unwise to rely on their working in the same way in later versions of the
software.
There are also some obsolescent features that are supported only for commands presented
to standard input (at the
ip> prompt), not for commands in TELL messages (such as
commands at the mymachine ip> prompt).
These are the processing of multiple commands on a line, separated by a semi-colon “;”;
comments, starting with “#”; definition of macros with the syntax
var=valu e, used as
$var within commands; and the env command to list macros. These features are not
discussed further in this document.
10.2 abort
10.2.1 Syntax
abort <assoc>
10.2.2 Description
Aborts an IP association; <assoc> is the number of the association as shown by the
files command. Currently (ATMOS IP version 1.29) this seems to be unreliable on
UDP associations and can cause a crash (possibly because of lax error-handling by
the application that opened the file); it is reliable on TCP associations.
The
abort command is hidde n, not shown by ip hel p; it is probably useful, if at all,
for debugging and troubleshooting.
10.2.3 Example