Atlantis Land I-Storm A02-RA Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 112

Atlantis Land I-Storm A02-RA Скачать руководство пользователя страница 33

4.12 show port

4.12.1 Syntax

port

<portname>

4.12.2 Description

Display detailed information about a port.
This command enumerates all attributes for a port and displays them on the console.
It is useful to determine the properties of a port.

4.12.3 Example

port atm

4.13 set port

4.13.1 Syntax

set port <portname> / <attributelist>

4.13.2 Description

Modify a port attribute.
This command may be used to modify an attribute on a port, overriding any values
specified in the original port configuration request. The effects of changing any such
attributes are device dependent.
This command is intended for development purposes only.

4.13.3 Example

set port atm /usercomment=”An ATM network port”

4.14 list channels

4.14.1 Syntax

list channels [<portname> ]

4.14.2 Description

List all open connections on the specified port. If no

portname

is specified, all

channels on all ports will be displayed.
The channels are shown with their identification number and a selection of

useful

attributes. A full attribute list can be obtained via the

show channel

command.

All channels are shown with the

Enabled

attribute first, which indicates if the

channel has yet been enabled (connected) by the application code.

4.14.3 Examples:

list channels 0

list channels atm:0

«
...
31
32
33
34
35
...
»

Содержание I-Storm A02-RA

















































































































Отзывы:

Нет отзывов