Atlantis Land I-Storm A02-RA, Справочник по командам

Страница: 15 / 112

2.12.1 Syntax
tell <process> <command>
2.12.2 Description
Sends the command as a TELL message to a specific process. Note that for many
processes the
tell can be omitted.
2.12.3 Example
mymachine>
tell hswctrl portinfo a1
port type vers flags
A1 25Mbps 1QUA mast uni30 ilmi netside tx8khz manconfig
2.13 exit, exit!
2.13.1 Syntax
exit
exit!
2.13.2 Description
Exits from application firmware to the boot ROM. Without the exclamation mark,
the command works only from the serial interface; with the exclamation mark it
works from any console device.
Note - This command is now deprecated and provides no useful output.
2.14 debug
2.14.1 Syntax
debug
2.14.2 Description
Enters the debugger. Only works when issued at the serial interface. (Since the
debugger talks to the serial interface, the
debug command would be of little use
elsewhere.)
2.15 crlf, nocrlf
2.15.1 Syntax
crlf
nocrlf
2.15.2 Description
Controls whether line-feed characters written to this console device are output as
carriage-return/line-feed pairs
(crl f) or just as single line-feed characters (nocrl f).